Home > Flashlights

Eagletac D25A Clicky XP-G2

Part Number D25A Clicky
Eagletac D25A Clicky XP-G2
Email a friend Email a friend
Price
Your Price:  
$45.00
Free Shipping
Share |
Quantity
Add to Wish List
Description
EagleTac D25A XP-G2 S2 Clicky is powered by 1 - AA battery with an output of 190 LED lumens.

The D25 Clicky flashlights are one of the smallest flashlight systems manufactured. Compact design, easy-to-use user interface and market leading output/brightness makes the EagleTac D25 Clicky the most versatile flashlight for everyday carry (EDC).

The D25 is packed with mega features that no one else has done yet with lights in this size class (to name a few: stainless steel clip, stainless steel bezel, all-copper spring, customized rigid holster with self-retention device & flip, water tight lens with AR & Sapphire coatings, partial copper heat sink for C2 and LC2, deep reflector in VLOP finish (Very Light Orange Peel), hidden strobe, etc.

Features:
Two groups (1 & 2) output, selected by twisting head/bezel
Three levels brightness and seven hidden modes (strobe, beacon, SOS, flash, etc) at group 1 (head loosen)
Turbo output and tactical strobe output at group 2 (head tighten)
Stainless steel bezel coated wit durable titanium in dark grey
Syntax ultra-clear glass lens w/ harden and both-side AR coating
Type III finish / aerospace grade aluminum
Stainless steel pocket clip in highly polished finish (A and C)
Light orange peel (LOP) reflector for maximum output and a smooth beam
Gold and silver plated contacts (made with brass and copper)
Superior knurling for improved grip
Heavy Duty Holster with self retention device
Mil-Spec Paracord Lanyard w/ quick attachment clip

*Using a 3.7V 14500 Li-ion Rechargeable battery direct drives the LED at maximum current level (up to 750 LED lumen from XM-L and about 550 LED lumen from XP-G/XT-E). Limit each usage to less than five minutes (or less than one minute each with freshly charged li-ion for the first couple times). Hold the light in your palm to help remove the heat from the LED. If you find the flashlight too warm to hold, turn off the light to allow the light to cool down. Do not leave the light running unintended. When using a Li-ion cell, all brightness levels will become the highest output (except the lowest mode). Expected runtime is about 20-35 minutes.

Operation:
1) Press the rear button switch until it clicks to turn on the flashlight. To switch off the light, press the switch again until it clicks.
2) Switching between group output: With the flashlight on, tighten the head to access group 2 output. Loosen the head to access group 1 output.
3) Switching between modes: With the flashlight on, slightly press the switch and release (within 1.5s) to switch to the next output.
Programmable Features
1) Moonlight output - dim or increase the entire output range of the group 1 output. Toggle this setting starting with the head loose, turn on the light, and then repeat tighten and loosen three times.
2) Mode memory* - remembers the last output in group 1. To toggle this setting, with head tight, turn the light on and repeat loosen and tighten three times. (*D25A2 clicky and C clicky only)
Browse Similar Items



 
 
spacer
 
 

 
spacer